英语必读——产品用语手册（四）

The 50kvar and 100kvar SVG adopts modular design. When multiple units are expanded, master-slave control is adopted. When multiple modules are connected in parallel, all modules share a set of current transformers, which can realize multiple functions such as reactive power compensation, active filtering and three-phase imbalance. It automatically adjusts the output according to the harmonic current of the load, dynamically filters, and adopts independent air duct design. Dust and rain will not adhere to the circuit board, which is suitable for use in harsh environments. The instantaneous response time is less than 0.1ms, and the full response time of device compensation is less than 20ms. The output filter adopts LCL structure to access the power grid. Its own high-frequency carrier will not be fed back to the power grid, and there is no interference with other equipment in the distribution system. It has a soft start control circuit to avoid excessive inrush current at the moment of starting and limit the current within the rated range. The module is installed in the cabinet and can be monitored centrally with a high-definition 7-inch touch screen. It is easy to operate. The screen displays the system and device operating parameters in real time, and has a fault alarm function.

50kvar 和100kvar的SVG采用模块化设计，多台扩容时采用主从控制方式，多台模块并联时，所有模块共用一套电流互感器，可实现无功补偿、有源滤波和三相不平衡多种功能，自动根据负载的谐波电流调整输出，动态滤波，采用独立风道设计，粉尘雨露不会附着在电路板上，适应在恶劣环境下使用，瞬时响应时间小于0.1ms，装置补偿全响应时间小于20ms,输出滤波采用LCL结构接入电网，自身的高频载波不会回馈到电网，对配电系统中其他设备没有干扰，具有软启动控制回路，避免启动瞬间过大的突入电流，限制该电流在额定范围之内，模块安装在柜体内，可采用高清晰7英寸触摸屏集中监控，操作方便，屏幕实时显示系统和装置运行参数，并且具有故障报警功能。